Samsara connects auxiliary cameras and in-cab monitors to the vehicle through the AI Multicam Hub (HW-MC-AIM4) or the AHD1 Camera Connector. This overview outlines the hardware included in each configuration and links to the installation guides. Complete the hub or connector installation before you install cameras and monitors.
The AI Multicam Hub supports up to four GX12 camera inputs and one in-cab monitor. Use it with Samsara CM3X series AI Dash Cams for expanded visibility around the vehicle. Every hub configuration includes the following core components:
-
AI Dash Cam (CM3X series)
-
AI Multicam Hub (HW-MC-AIM4)
-
Y-harness (to connect and power the hub and dash cam)
-
Mounting brackets and fasteners
-
Cable management accessories
Connect up to four auxiliary or 360° Visibility cameras and one in-cab monitor to the hub. Cameras are typically mounted at the side mirrors, rear, front, or interior based on fleet needs. Camera roles and monitor behavior are configurable in the Samsara dashboard.
For installation steps, see the 360° Visibility Camera and Monitor Installation Guide.
-
Up to four 360° Visibility cameras
-
360° Visibility monitor (with power harness) or compatible in-cab monitor
-
Camera extension cables (up to 15 meters per camera)
-
Monitor mounting bracket
-
Cable clips and mounting hardware
Bird's Eye View uses four fisheye cameras on the AI Multicam Hub to provide a stitched top-down view with AI hazard detection during low-speed maneuvers. Camera ports use fixed Bird's Eye View roles (left, right, rear, front) that you cannot change in device settings after assignment.
For installation steps, see the 360° Visibility Camera and Monitor Installation Guide.
-
Bird's Eye View fisheye camera (HW-MC41), quantity 4
-
Calibration mats (included with Bird's Eye View kits when applicable)
The AHD1 Camera Connector supports one 360° Visibility camera and one in-cab monitor for fleets that need a single auxiliary view without the AI Multicam Hub. Both devices connect through GX12 connectors.
For installation steps, see the 360° Visibility Camera and Monitor Installation Guide.
-
360° Visibility monitor (with power harness)
-
One 360° Visibility camera
-
Camera extension cable
-
Monitor mounting bracket
-
Cable clips and mounting hardware
Comments
0 comments
Please sign in to leave a comment.