VG54 or VG55
Use this workflow to install the Vehicle Gateway (VG54 or VG55) with the diagnostic cable CBL-VG-DJ1939-VOE. This cable is purpose-built for Volvo Operated Equipment (Yellow Iron) and is not intended for Volvo on-road vehicles.
What You'll Need
| Quantity | Description | |
|---|---|---|
| 1 | Vehicle Gateway | |
| 1 | Diagnostic Y splitter cable | |
| 2 | Long-narrow cable ties (VG box) | |
| 2 | Short-wide cable ties (cable bag) | |
| 2 | Long-wide cable ties (cable bag) | |
| 1 | Flush cutters (not provided) |
Diagnostic Cable CBL-VG-DJ1939-VOE
| Description | |
|---|---|
| Spare diagnostic connector | |
| Main diagnostic connector | |
| Gateway connector |
Install the VG:
-
If you have not already done so, activate the device in the Samsara dashboard using one of the following methods:
- Install and activate your Samsara devices with the Samsara Fleet App, designed for a smooth onboarding experience. (Recommended)
-
Go to https://cloud.samsara.com/activate.
-
With the engine off, locate the vehicle’s diagnostic port. Detach the port from its original mounting location in the vehicle.
Typically, the port is mounted on the fuse panel box just behind the driver or below the driver dashboard near the driver side window.
-
Remove the equipment port from the back of the panel. Connect the Samsara main diagnostic connector to this equipment port; twist to lock.
-
Connect the Samsara cable to the detached diagnostic port after it has been removed from the vehicle panel.
The vehicle’s diagnostics will remain accessible using the additional port on the Samsara cable.
Confirm that the Vehicle Gateway and all cables are clear of the vehicle’s pedals, steering linkage, and other moving parts.
-
Plug the 16-pin diagnostics/power connector into the VG. It will click when fully inserted.
-
Turn on your vehicle and verify that the VG indicator light turns green; this can take 1-3 minutes.
Note
The indicator light may initially display green, but then change again temporarily (for example, such as when the VG connects, but then downloads and installs an update).
If the indicator light turns amber, ensure that you are installing the VG in an area with good cellular reception.
If the indicator light turns blue, turn your vehicle off and then back on before proceeding to the next step.
- If you are using the Samsara Fleet App to set up the VG, you can return to the app to verify the installation after the indicator light turns green.
- Ensure the vehicle is powered on and wait for all of the checks in the app to pass.
- Add vehicle details like the license plate number in the app.
-
Plug in the cable connectors for any applicable accessory devices (USB or 8-pin AUX devices).
Access the accessory device ports by removing and properly discarding the port covers.
-
Using the narrow cable ties included in the VG box, secure the power cable and any accessory device cables.
Note
Using the wide cable ties which come with the diagnostics cable is not recommended as they may cause interference with the cable connections.
Tip
Secure the VG tightly to the vehicle. A loose VG may cause inconsistent detection of Harsh Events. If possible, avoid surrounding the VG with metal parts as this could interfere with wireless or GPS connectivity.
-
Secure the power cable and any accessory device cables using the cable ties included in the cable bag.
Tip
Avoid wrapping the power and device cables around the gateway. Avoid tight bends in the cables.
- If you experience any issues during installation, visit the Samsara Help Center to find solutions to most issues.
This installation guide contains typical information specific to products manufactured at the time of its publication. The contents of this guide do not constitute a warranty and are for reference only. Consult applicable local laws and ordinances to determine any installation restrictions. It is the installer’s responsibility to comply with all applicable laws and ordinances when installing this hardware.
Do not attempt to repair this product, use any third party replacement parts with this product, or otherwise modify this product except in accordance with product manuals or as otherwise instructed by Samsara. Failure to do so may cause property damage, lead to physical injury, or void your product warranty.
Any installation not in accordance with the instructions in the installation guide or otherwise in the Documentation or other than as described by the recommended operating conditions may result in physical injury or property damage. Failure to follow these directions could result in serious injury or death.
This hardware and any associated software may not be compatible with third party products and/or services and may interfere with the operations of or void warranties for such third party products and/or services.
Do not install or adjust hardware while driving or operating the vehicle. Do not install this hardware in a location that could interfere with the driver’s visibility or operation of vehicle controls. Do not install this hardware on or near airbag panels or within the working range of an airbag.
Do not install hardware while the vehicle is unsecured. Do not install hardware while the vehicle is turned on unless instructed to turn on the vehicle by the installation guide. Failure to follow installation instructions may cause serious physical injury, damage to the vehicle or the hardware, and void vehicle or other third party product warranties.
Do not install this hardware on or near flammable or otherwise hazardous materials. This hardware may burst if placed near flammable or other hazardous materials, creating a risk of fire, burn, shock, or other serious injury. Hardware may sustain water damage if the seal is damaged. Do not use if the housing or housing seal appears damaged.
Batteries in the hardware may have a shorter life span if not used in accordance with instructions. Only use lithium-ion batteries with this hardware. Do not short circuit, crush, disassemble, heat above 140°F (60°C), incinerate, or expose the battery or its contents to water. Do not remove the battery from the hardware to recharge or for any other reason, including disposal. Do not solder directly to the battery cell. Do not use if the battery appears damaged.
This product includes capacitors and batteries which may present a potential fire, explosion, electric shock, or burn hazard. Do not touch or come into close proximity to any capacitors within this hardware.
Please always pay attention to your surroundings and drive safely, comply with all traffic laws, and observe the road and driving conditions at all times. Do not rely on the product to alert the driver of safety hazards or to prevent collisions. The hardware and associated software may not work as intended depending on road conditions, other vehicles, weather, and other factors.
Keep this hardware within the following temperature ranges: -40°F to 140°F (-40°C to 60°C) when externally powered, -4°F to 140°F (-20°C to 60°C) when discharging on battery, and 32°F to 113°F (0°C to 45°C) when charging. Failure to keep this hardware in the specified temperature range may result in safety risks.
Failure to follow mounting instructions may create a risk of physical injury or property damage from falling objects. If mounting the hardware to a building wall, check for wiring or plumbing before drilling any holes.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
| This symbol on the product(s) and / or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery, and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. |
Comments
0 comments
Please sign in to leave a comment.