You can pair the AG24/26 with Samsara sensors for temperature and humidity monitoring, cargo monitoring, and door monitoring. To provide a complete picture of the status of the asset, you can use multiple sensors with a single AG24/26.
The AG24/26 is compatible with the following sensors:
To add a sensor to your organization:
-
Activate the device in your dashboard if you have not already done so.
Your sensor links to the closest AG24/26 with the strongest connection unless you manually link or pin the device to a specific gateway.
-
(Optional) To configure the location of the sensor on the trailer, see Sensor Position Management.
If you opt to manually pin a sensor to a specific AG24/26 instead of allowing auto-detection of the nearest gateway, the sensor information will populate in association with the pinned gateway, but may also use other gateways to upload the sensor data.
To pin the sensor to an AG:
-
Select the Settings icon (
) at the bottom of your Fleet menu to view dashboard settings.
-
Navigate to Devices > Sensors.
-
Locate the sensor in the device list and click more actions menu (...) and then click Edit on the device row.
-
Locate the option to Pin sensor to a particular Gateway, select the gateway from the list and Save the assignment.
Comments
0 comments
Article is closed for comments.