The integrated Equipment Overview Tab provides a consolidated view into the current state of all powered equipment assets. Equipment information from both AGs and IGs is accessible on this page.
The Equipment Overview Tab has the following key features:
- Comprehensive Equipment Data - Track utilization, troubleshoot issues, plan more efficient maintenance, and view selected CAN SPN diagnostics all from the same page
- Complete Equipment View - All equipment connected via CAN 3PD will be displayed in one place, this includes equipment paired with AG46P (powered equipment mode), AG24 (powered equipment mode), AG26 (powered equipment mode), and IG15 (associated with CAN 3PD)
- No Configurations Needed - Once a device is plugged in the equipment will appear in the Equipment Overview Tab and start reporting data, no additional configuration will be required
- Note that you are still responsible for adding tags, setting maintenance schedules, and enabling alerts on new devices. Existing schedules, tags, and alerts on existing devices will be displayed.
How to Use
Navigate to the Equipment Overview Tab by starting on the Fleet dashboard. Select Overview > Assets > Equipment.
Columns available
|
Column Name (bolded if default) |
Description |
|---|---|
|
Asset Name |
Configured display name of the asset, links to asset view page |
|
Running Status |
Displays RUNNING or OFF depending on the asset’s current state (engine on or off). On/Off indication:
|
|
Asset Location |
Current location of the asset, address or geofence |
|
Utilization |
The total amount of time that the asset has been running in the past 7 days compared against the weekly total hours available for the asset, displayed as a percentage. You can configure the total available hours on the Utilization Report |
|
Total Engine Hours |
Total amount of time that the asset has been running, displayed in hours |
|
Maintenance Due |
Amount of running time or engine hours before maintenance will be required or that is is overdue, based on the configured Maintenance Schedule for the asset. If your asset has more than one Maintenance Schedule configured, hover over "+ more" to see other schedules. You can configure the Maintenance Schedule on the dashboard's maintenance page |
|
Issues |
Column includes configured and firing alerts and DTCs. When clicked on information about the alert is displayed. |
|
Battery Voltage |
Raw data from the SPN 168, displayed in V |
|
Engine Load |
Raw data from the SPN 92, displayed as a percentage |
|
Engine Oil Level |
Raw data from the SPN 98, displayed as a percentage |
|
Engine Oil Pressure |
Raw data from the SPN 100, displayed in kPA |
|
Engine Oil Temperature 1 |
Raw data from the SPN 175, displayed in C |
|
Engine Coolant Temperature |
Raw data from the SPN 110, displayed in C |
|
Engine Air Filter 1 Differential Pressure |
Raw data from the SPN 107, displayed in kPA |
|
Fuel Level |
Raw data from the SPN 96, displayed as a percentage |
|
Fuel Pressure |
Raw data from the SPN 94, displayed in kPA |
|
Fuel Rate |
Raw data from the SPN 183, displayed in L/Hr |
|
Fuel Used |
Raw data from the SPN 250, displayed in L |
* Please note that Equipment connected to AG46P will not display SPNs.
In order to select, change placement, and view other columns supported, click on the columns icon, located in the right corner of the dashboard (circled in red in the picture below).
Check columns you want to see on the dashboard, uncheck those you don’t. You can change the order columns appear by clicking and holding the two lines (circled in red below) and moving the selected column up or down to the correctly ordered spot. The dashboard supports viewing 7 columns at a time. Hitting reset will restore the default columns.
Filtering and searching
You can filter based on tags and geofence and search by keywords. You can sort the page by Asset Name and Running Status in ascending or descending order. Click the space directly to the right of the column name to sort, a small black arrow should appear to indicate ascending or descending order.
Activation
Please refer to this article for more information on how to enable beta features in your dashboard.
Comments
0 comments
Please sign in to leave a comment.