To reduce driver error and encourage drivers to select vehicles in close proximity, you can Restrict vehicle selection based on location. After this setting is enabled, drivers are encouraged to select vehicles that are within a predefined radius from the driver location. You can use this feature with Workflow Builder to prevent drivers from selecting vehicles outside their proximity.
To enable Restrict vehicle selection based on location in the Samsara Driver App:
Select the Settings icon ( ) at the bottom of your Fleet menu to view dashboard settings.
Select Fleet > Driver App > General.
Enable Location-based vehicle selection.
By default, drivers will be limited to a vehicle selection within a radius of 100 meters from their position. You can select a vehicle limit radius of 20, 100, or 500 meters from the driver position.