Terminology
-
waiting time: §395.1(d)
-
(d) Oilfield operations. (1) In the instance of drivers of commercial motor vehicles used exclusively in the transportation of oilfield equipment, including the stringing and picking up of pipe used in pipelines, and servicing of the field operations of the natural gas and oil industry, any period of 8 consecutive days may end with the beginning of any off-duty period of 24 or more successive hours.
(2) In the case of specially trained drivers of commercial motor vehicles that are specially constructed to service oil wells, on-duty time shall not include waiting time at a natural gas or oil well site. Such waiting time shall be recorded as “off duty” for purposes of §§395.8 and 395.15, with remarks or annotations to indicate the specific off-duty periods that are waiting time, or on a separate “waiting time” line on the record of duty status to show that off-duty time is also waiting time. Waiting time shall not be included in calculating the 14-hour period in §395.3(a)(2). Specially trained drivers of such commercial motor vehicles are not eligible to use the provisions of §395.1(e)(1).
-
Feature Description
-
Drivers can select a new duty status "Waiting Time". While in the Waiting Time duty status, the shift clock will be paused. This duty status will be a dotted line for the driver in the Off Duty row. Samsara will not add this duty status as a 5th line. This feature only addresses the pausing of the shift clock. For your oilfield operation drivers, you will also need to configure a 24 hour reset period in the Compliance settings area of the dashboard.
Configuration
Configuring Drivers via Dashboard
-
Navigate to Settings → Drivers → Edit Driver
-
Enable “Waiting Time (WT)”
- There will be a warning that highlights this duty status should only be used by eligible drivers.

Configuring Drivers via csv Upload
-
Look for column that states “Waiting Time (WT)”
-
Set to "True" for drivers that are desired to have the exception enabled
-
Upload csv to drivers page

Driver Facing Screens
Selecting Duty Status
-
Go to Duty Status Picker → Select WT
-
Waiting Time will now be in the log
-
See DOT Inspection page with Waiting Time
1.Duty Status Picker |
2.Waiting Time Duty Status |
3.Waiting Time on the Log |
4.DOT Inspection |
---|---|---|---|
![]() |
![]() |
![]() |
![]() |
Admin Facing Screens
-
When the Duty Status is selected, we will show the Duty Status in the admin facing logs

Comments
0 comments
Please sign in to leave a comment.