Start and Manage Runs with the HMI

After setting up your HMI device, you can now use it to manage production runs.

The homepage of the HMI is a device selection screen which lists out all of the cameras that are currently registered to your organization. Cameras will appear as either serial numbers (by default) or custom names if you have renamed them. You can select the "Menu" option in the top right corner of any downstream page to return to this homepage. 

Selecting a camera will bring up a list of inspection programs that have been configured on the camera. To start a run, locate the program you want to use and select it.

Once you select the program you want to start, you will be taken to a confirmation screen containing additional details around what inspections are used. Hit the start button to begin the run. The HMI will then shift to its operational mode.

In this view, you will see updates as inspections are being completed. To view details of any individual inspection, simply click on the related bar from the list on the left. If your triggers are set to manual mode, you can use the large capture button on the right side to capture images. 

Once the run is done, hit “End Run” to stop the program.