Once you have finished configuring your program, the next step is connecting your VS2 to your external systems such as rejectors or tower lights. To do this, you need to define the desired behavior for when to send a signal through the VS2 output wire. This is behavior is defined in the Settings tab of the program screen.
The output behavior is unique to each program, so you can set your tolerance for when to trigger an outbound pulse differently for different programs.
To test the pulse with your external system, click the “Test Pulse” button and a pulse will be sent through the VS2 output wire.
A second output option available is to configure a webhook to receive real-time inspection results via an outbound API. This option requires you to provide a URL endpoint for the VS2 devices to programmatically send inspection step results via JSON. Again, you can define the behavior for when to send results outbound via the webhook. The webhook and GPIO can be used at the same time.
For more information about the APIs, please refer to the VS2 API guide.