Triggers are internal or external signals that automate image capture. The second tab on the navigation bar of the program screen is the "Trigger" configuration.
In this tab, you can set up the trigger type for the program. Three options are available:
- Periodic: This option will cause the camera to capture an image in a timed periodic fashion as defined by the user-specific time in milliseconds.
- External: This option will cause the camera to trigger only when an externally wired device (such as a photoelectric break beam) outputs a trigger into the VS2 device.
- Manual Trigger: This option will cause the camera to the only trigger based on manual input from the user.