Once you’ve set up your camera settings to capture clear images, you need to take a master image. This will be the reference photo that all your inspection steps will be built with. For best practice, ensure that the image has all objects of interest in focus and with clear contrast.
To begin setting the master image, navigate to the “Camera” tab in the upper right corner.
Once you have your object in focus and properly lit, click the "Set as Master Image" button on the bottom of the screen (as seen below). This will capture the image in the frame and set it as the master image.
Once your master image is set, you’ll be taken to the Inspect tab where you can begin building inspections.
To reset your master image at any time, you can return to the Camera tab and click the "Set as Master Image" button at the bottom.
Notes: Once you have set your master images the camera settings that you have configured will stay the same so there is no further need to adjust the camera. All test or real images will be taken with the same camera settings configured to take the master image.