Ethernet - 10/100 Mbps (10/100 Base-T)
Wifi - Wifi 802.11 b/g/n
No inbound port forwarding rules are required
VS2 requires DNS and NTP for name resolution and accurate time
Outbound communication to the Samsara Cloud is via TLS over TCP port 443
The camera is configured to acquire an IP address via DHCP, but can be configured with a manual IP address on its ethernet port. Wi-Fi connectivity requires DHCP.
Bandwidth requirements vary with the rate of inspections made, but will not exceed 200kbps, per camera/controller pair. Currently the VS2 will upload a maximum of 1 pass and 1 reject image per second, regardless of actual inspection rate.