Configuring Settings and Renaming AG4x
To change the Settings of your AG4x, navigate to Overview > Assets > Select Asset > Settings.
To rename your device, you can click on the current Name and input your desired name. Scroll down and select Save.
Configuring the Check-In Rate
You can configure your AG4x to check in its GPS location at a frequency suitable for your business. If theft or unauthorized use are your primary concerns you can temporarily set the check-in frequency to every 30 minutes. Alternatively, if preserving battery is a higher priority because your assets are at low risk of theft, you can set a less frequent check-in rate.
1. Navigate to Settings > Assets. From here you can configure your Check-In Schedule.
2. You can select the desired rate from the dropdown bar. You can set up your AG4x to check in with the Samsara dashboard at one of the following intervals:
- 30 minutes
- 1 hour
- 2 hours
- 6 hours
- 12 hours
- 24 hours
- 48 hours
- 72 hours
3. Click Save. The device will accept the new check-in rate during the next scheduled check-in.
Note: The AG battery life becomes shorter with more frequent check-ins. We recommend setting the check-in rate to 12 hours.
For additional information on how to configure the check-in rate please refer to this article.