The AG41 Asset IoT gateway can be installed in a variety of unpowered assets and equipment, such as roll-off bins, intermodal containers, portable toilets, and field assets. The AG41 can also be installed on powered equipment, though it is recommended to use the AG24 with a Power Cable in this instance.
AG41 installation has two easy steps:
- Mount the AG41 to the asset using self-tapping screws or very-high-bond tape (both included with the device). Zip ties or mounting bolts can also be used.
- Screw in the end cap to activate the device.
The AG41 can be mounted in several covert locations, such as behind an outside ledge or under the body of the asset. For more information on installation, see the AG41 install guide: https://www.samsara.com/pdf/docs/ag41-install-guide.pdf.
Once activated, the AG41 will conduct a check-in with the Samsara Cloud every 12 hours. To ensure optimal battery life, see the following article for guidance: https://kb.samsara.com/hc/en-us/articles/360004815953-AG41-Battery-Life.