The AG24 Asset IoT gateway offers many configurations to physically connect to powered assets, such as trailers, powered equipment (with or without powered takeoff), chassis, and more. One possible configuration for powered equipment is to use the AG24 powered asset cable. With this cable, the AG24 can draw full power from the equipment battery when the equipment is running, and will switch to the AG24s own internal battery when the activation signal is off.
Though labeled “Ignition,” the yellow wire can be hooked up to any 12VDC signal on the equipment, and the red “Power” wire can be installed on any 12-24VDC power source. Please note that you should not wire a 24VDC signal onto the “Ignition” wire. Should you have to install the “Ignition” wire on a 24VDC signal, please reach out to support who will provide further instruction.
This cable is compatible with countless equipment types: utility trailers, skid steers, backhoes, cranes, generators, pumps, forklifts, and more.
To learn more about installation, please see the Installation Guide: https://s3-us-west-2.amazonaws.com/corpweb-static/pdf/docs/ag24-powered-asset-install-guide.pdf .