|Looking for information for an in-house audit? Click here.|
It's important for drivers to prepare and know what to do in case of a roadside inspection:
- Before the inspection
- Verify Driver Information on the DOT Inspection screen.
- Locate Required In-cab Materials
- During the inspection: If requested, transfer your logs to the inspector
Verify Driver Information
As a driver, it's important to verify that the DOT Inspection screen lists all of your driver information correctly. Navigate to the HOS > DOT Inspection to proceed.
The instructions in this document assume that your vehicle's device is configured for operation as an ELD. Verify this configuration using the information below:
Locate Required In-cab Materials
Before you get started with your day, locate the required in-cab materials in your vehicle. These materials may be requested during an inspection.
For more details, see our KB article on the Required In-Cab Materials.
Transfer Your Logs
With the required materials are in the cab, the last thing to do is make sure you know how to transfer logs to the DOT Inspector.
From the DOT inspection screen, the top right button allows for transferring logs to an inspector. From this page, there are three options: Wireless Web Services (WWS), E-mail to DOT and E-mail to Myself. *Please note “Email to Myself” is only for driver reference and should not be used in a Roadside Inspection.
Once selecting either WWS (recommended) or Email to DOT, you will be prompted with a window asking if you'd like to transfer the log and a comment field. Enter a comment if provided by the Enforcement Agent. After that, tapping the Send Logs button will send the DOT the logs.
Note: There is no way to rescind a log transfer request after submission.
It's important to note that transferring logs requires the device to have an internet connection. If the device is using the Samsara hotspot, the vehicle gateway must be within range of the device to transmit the logs.
You can also reference our training video below.